TURCK MultiSafe MS25-10 S158 Rotational Speed Monitor / Tachometer, 220 VAC

TURCK MultiSafe MS25-10 (front marking S158) is an industrial rotational-speed measuring monitor / frequency-to-analogue converter for machinery speed feedback. It processes a pulsed speed sensor input and provides proportional analogue outputs for monitoring and control integration. This is the 220 VAC, 48–62 Hz variant. Three selectable input pulse-rate bands are listed for this exact model: Range I 1.5–30 pulses/min, Range II 15–300 pulses/min, and Range III 150–3,000 pulses/min. Analogue outputs: 4–20 mA and 0–10 V. Front controls labelled 'Faktor (Endabgleich)' (factor/final adjustment) and 'Verzögerung' (delay), plus range-selector terminals. Screw terminal connections; DIN-rail style module. Typical uses include monitoring rotation of drives, conveyors and other machinery and transmitting speed as an analogue signal to a PLC or monitoring system. The four supplied units are described by the owner as NEW WITHOUT ORIGINAL PACKAGING. This is surplus stock; factory-sealed status, performance testing, accessory completeness and warranty are not claimed. Installation must use wiring instructions for this exact voltage variant. Do not confuse it with the different TURCK MS25-UI model or other manufacturers' MS25-10 part numbers. Power must not be applied as if it were the 110 VAC or 24 VDC variant.