ACS880-01-07A2-3+E200+K454+P909
ACS880-01-07A2-3+E200+K454+P909
Identify the right part for your application
ABB Drive Type Code: ACS880-01-07A2-3+E200+K454+P909 Full Description This is an ABB ACS880-01 industrial AC drive, wall-mounted type, for controlling AC motors with ABB’s Direct Torque Control (DTC). Base Drive Item Description Series ACS880 Drive type -01 = Wall-mounted single drive Rated output current 07A2 = 7.2 A nominal output current Voltage code -3 = 3-phase 380…415 V AC supply class Typical motor power Approx. 3 kW normal duty at 400 V, depending on duty rating and motor Enclosure Standard ACS880-01 is typically IP21 / UL Type 1 unless other protection option is specified Control method ABB DTC – Direct Torque Control Motor types Induction motor, permanent magnet motor, synchronous reluctance motor Safety Built-in Safe Torque Off, STO Standard I/O Digital inputs, analog inputs/outputs, relay outputs, STO terminals, drive-to-drive link Mounting Wall-mounted industrial drive Included Plus Code Options +E200 – EMC/RFI Filter This option indicates an EMC filter fitted in the drive. Typical description: Internal EMC/RFI filter For reducing conducted emissions Commonly used for compliance with industrial EMC requirements Usually intended for grounded TN/TT supply networks If used on IT/ungrounded or corner-grounded networks, ABB instructions must be checked because EMC filters may need to be disconnected or may not be suitable. +K454 – PROFIBUS DP Fieldbus Adapter +K454 is the factory-fitted PROFIBUS DP adapter module. Typical module: FPBA-01 PROFIBUS DP-V1 adapter Allows the drive to communicate with PLC/DCS systems over PROFIBUS Supports control word/status word, speed or torque reference, actual values, parameters and diagnostics Used with Siemens PLCs and other PROFIBUS master systems Installed in the drive option slot So the main option card in this drive is: FPBA-01 PROFIBUS DP fieldbus adapter card +P909 +P909 is an ABB plus code, but it is not normally considered a communication option card like +K454. Its exact meaning can depend on ABB region/order configuration or revision of the ACS880 price list. To confirm precisely, check the ABB order confirmation or the drive’s delivery documentation. Summary Description ABB ACS880-01-07A2-3+E200+K454+P909 is a wall-mounted ABB ACS880 industrial drive, rated 7.2 A, for 3-phase 380…415 V AC supply, suitable for approximately 3 kW motor control at 400 V. It includes an EMC/RFI filter and a factory-installed PROFIBUS DP communication adapter, FPBA-01. The drive uses ABB DTC motor control and includes built-in Safe Torque Off safety functionality.
ABB Drive Type Code: ACS880-01-07A2-3+E200+K454+P909 Full Description This is an ABB ACS880-01 industrial AC drive, wall-mounted type, for controlling AC motors with ABB’s Direct Torque Control (DTC). Base Drive Item Description Series ACS880 Drive type -01 = Wall-mounted single drive Rated output current 07A2 = 7.2 A nominal output current Voltage code -3 = 3-phase 380…415 V AC supply class Typical motor power Approx. 3 kW normal duty at 400 V, depending on duty rating and motor Enclosure Standard ACS880-01 is typically IP21 / UL Type 1 unless other protection option is specified Control method ABB DTC – Direct Torque Control Motor types Induction motor, permanent magnet motor, synchronous reluctance motor Safety Built-in Safe Torque Off, STO Standard I/O Digital inputs, analog inputs/outputs, relay outputs, STO terminals, drive-to-drive link Mounting Wall-mounted industrial drive Included Plus Code Options +E200 – EMC/RFI Filter This option indicates an EMC filter fitted in the drive. Typical description: Internal EMC/RFI filter For reducing conducted emissions Commonly used for compliance with industrial EMC requirements Usually intended for grounded TN/TT supply networks If used on IT/ungrounded or corner-grounded networks, ABB instructions must be checked because EMC filters may need to be disconnected or may not be suitable. +K454 – PROFIBUS DP Fieldbus Adapter +K454 is the factory-fitted PROFIBUS DP adapter module. Typical module: FPBA-01 PROFIBUS DP-V1 adapter Allows the drive to communicate with PLC/DCS systems over PROFIBUS Supports control word/status word, speed or torque reference, actual values, parameters and diagnostics Used with Siemens PLCs and other PROFIBUS master systems Installed in the drive option slot So the main option card in this drive is: FPBA-01 PROFIBUS DP fieldbus adapter card +P909 +P909 is an ABB plus code, but it is not normally considered a communication option card like +K454. Its exact meaning can depend on ABB region/order configuration or revision of the ACS880 price list. To confirm precisely, check the ABB order confirmation or the drive’s delivery documentation. Summary Description ABB ACS880-01-07A2-3+E200+K454+P909 is a wall-mounted ABB ACS880 industrial drive, rated 7.2 A, for 3-phase 380…415 V AC supply, suitable for approximately 3 kW motor control at 400 V. It includes an EMC/RFI filter and a factory-installed PROFIBUS DP communication adapter, FPBA-01. The drive uses ABB DTC motor control and includes built-in Safe Torque Off safety functionality.
In stock: 1
